Shower drain without edge with grid for embedding tiles


Shower drain without edge with grid for embedding tiles


  • For indoor use
  • For drainage of floor-level showers
  • For installation into open spaces or near the wall of the shower area
  • For use of various types of floor coverings
  • For wheelchair access
  • For sites with limited floor height


  • Elegant design thanks to the grid for embedding tiles without a stainless steel frame
  • Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
  • Installation height from 70 mm
  • Adjustable height
  • Trap firmly connected to the drain – 100% waterproofing
  • Self-adhesive tape for quality waterproofing
  • Mechanically cleanable trap up to the waste pipe
  • The collar and trap are protected by foil, and the channel itself by a polystyrene insert
  • The high flow rate is achieved due to the double compartment trap system
  • Possibility to buy a combined odour trap
  • 25 years guarantee
  • Shower drain material: stainless steel 2 mm, AISI 304, DIN 1.4301
  • Trap material: polypropylene


  • The shower drain is assembled with the odour trap
  • Grid for gluing various types of floor coverings
  • Template for cutting tiles on the grid
  • Fixation set: screws Ø6×50 – 2 pcs, dowels Ø10 – 2 pcs
  • Self-adhesive waterproofing tape
  • Protective foil covering for the drain edges and odour trap
  • Protective film for trap inlet
  • Installation trough cover – polystyrene
  • Dismantling hook

Additional information

Odour trap

28 mm

Flow rate

35 l/min

Resistance of odour trap against the pressure

575 Pa

Waste pipe diameter

40 mm

Minimum thickness of concrete

70 mm

Total installation height

70 – 97 mm

Load class K3

300 kg

Quantity – packing

9 pcs

Quantity – Palett

144 pcs

Dimensions – piece

385×185×160 mm

Dimensions – packing

590×430×390 mm


2,4806 kg

Weight – packing

22,3254 kg

Weight– Palett

357,2064 kg