APZ6 PROFESSIONAL
Shower drain with an edge for full grids
Description
Shower drain with an edge for full grids
APPLICATION
- For indoor use
- For drainage of floor-level showers
- For installation into open spaces or near the wall of the shower area
- For full grids, grid FLOOR for embedding tiles and prismatic grid GAP
- For wheelchair access
SPECIFICATIONS
- Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
- For inserting full grids – stainless steel, tempered glass, synthetic stone, grid for embedding tiles and prismatic grid
- Installation height from 95 mm
- Adjustable height
- Trap firmly connected to the drain – 100% waterproofing
- Self-adhesive tape for quality waterproofing
- Mechanically cleanable trap up to the waste pipe
- The collar and trap are protected by foil, and the channel itself by a polystyrene insert
- The high flow rate is achieved due to the double compartment trap system
- Possibility to buy a combined odour trap
- 25 years guarantee
- Material of drainage channel: stainless steel AISI 304, DIN 1.4301
- Trap material: polypropylene
SCOPE OF SUPPLY
- The shower drain is assembled with the odour trap
- Anchoring set: screw Ø6×50 – 2 pcs, dowel Ø10 – 2 pcs, screw Ø4.2×38 – 3 pcs, dowel Ø8 – 3 pcs
- Self-adhesive waterproofing tape
- The collar and the odour trap inlet are covered by the protective foil
- Installation channel cover
- Fixing hardware for anchoring the adjustable legs: screw M6×12 – 2 pcs
Additional information
| Odour trap | 50 mm |
|---|---|
| Flow rate | 60 – 68,8 l/min |
| Resistance of odour trap against the pressure | 982 Pa |
| Waste pipe diameter | 50 mm |
| Minimum thickness of concrete | 95 mm |
| Total installation height | 110 – 168 mm |
| Load class K3 | 300 kg |
| Quantity – packing | 9 pcs |
| Quantity – Palett | 144 pcs |
| Dimensions – piece | 385×130×175 mm |
| Dimensions – packing | mm |
| Weight | 2,0888 kg |
| Weight – packing | kg |
| Weight– Palett | kg |
