Shower drain with an edge for perforated grids


This drain is designed to take perforated grids. The stainless steel edge makes an elegant border between the tiles and the grid. Water flows into the drain both at the edges and through the perforations in the grid. It can therefore be positioned on the floor or near the wall of the shower area.


  • For indoor use
  • For drainage of floor-level showers
  • For installation into open spaces or near the wall of the shower area
  • For perforated stainless steel grids
  • For wheelchair access


  • Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
  • Installation height from 85 mm
  • Adjustable height
  • Trap firmly connected to the drain – 100% waterproofing
  • Self-adhesive tape for quality waterproofing
  • Mechanically cleanable trap up to the waste pipe
  • The collar and trap are protected by foil, and the channel itself by a polystyrene insert
  • The high flow rate is achieved due to the double compartment trap system
  • Possibility to buy a combined odour trap
  • 25 years guarantee
  • Material of shower drain: stainless steel 2 mm, AISI 304, DIN 1.4301, EN1253-1
  • Trap material: polypropylene


  • The shower drain is assembled with the odour trap
  • Fixation set: screws Ø6×50 – 2 pcs, dowels Ø10 – 2 pcs
  • Self-adhesive waterproofing tape
  • Protective foil covering for the drain edges and odour trap

Additional information

Odour trap

50 mm

Flow rate

60 – 68,8 l/min

Resistance of odour trap against the pressure

982 Pa

Waste pipe diameter

50 mm

Minimum thickness of concrete

85 mm

Total installation height

100 – 158 mm

Load class K3

300 kg

Quantity – packing

9 pcs

Quantity – Palett

144 pcs

Dimensions – piece

385×130×175 mm

Dimensions – packing



1,856 kg

Weight – packing

17,5932 kg

Weight– Palett

301,4912 kg

Hello 👋
Can we help you?