Shower drain with an edge for perforated grids, straight outlet


Shower drain with an edge for perforated grids, straight outlet


  • For indoor use
  • For wooden and prefabricated buildings
  • For drainage of floor-level showers
  • For installation into open spaces or near the wall of the shower area
  • For perforated stainless steel grids
  • For wheelchair access
  • For sites with limited floor height


  • High flow rate (up to 68 l / min)
  • 100% easy clean trap
  • Low height installation
  • Complete technical and design solutions
  • Complete package including all accessories
  • 25 year guarantee


  • Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
  • Installation height from 55 mm
  • Adjustable height
  • Trap firmly connected to the drain – 100% waterproofing
  • Self-adhesive tape for quality waterproofing
  • Mechanically cleanable trap up to the waste pipe
  • The collar and trap are protected by foil, and the channel itself by a polystyrene insert
  • The high flow rate is achieved due to the double compartment trap system
  • Possibility to buy a combined odour trap
  • 25 years guarantee
  • Shower drain material: stainless steel 2 mm, AISI 304, DIN 1.4301
  • Trap material: polypropylene


  • The shower drain is assembled with the odour trap
  • Fixation set: screws Ø6×50 – 2 pcs, dowels Ø10 – 2 pcs
  • Self-adhesive waterproofing tape
  • Protective foil covering for the drain edges and odour trap

Additional information

Odour trap

28 mm

Flow rate

44 l/min

Resistance of odour trap against the pressure

575 Pa

Waste pipe diameter

40 mm

Minimum thickness of concrete

55 mm

Total installation height

70 – 96 mm

Load class K3

300 kg

Quantity – packing

12 pcs

Quantity – Palett

36 pcs

Dimensions – piece

1120×135×170 mm

Dimensions – packing



3,9754 kg

Weight – packing


Weight– Palett