APPLICATION

• For indoor use
• For drainage of floor-level showers
• For installation into open spaces or near the wall of the shower area
• For wheelchair access

SPECIFICATIONS

• Plastic shower drain with stainless steel edge, which is tightly fixed around the circuit
• They are made of highly durable plastic that resists frost and chemistry
• Installation height from 62 mm
• Adjustable plastic anchoring legs 0–35 mm allowing fast and convenient installation, including the precise setting of the required level
• High resistance against chemicals
• Secure connection to the construction waterproofing system
• The combined odour trap (own protected patent solution) provides protection against the odours from the sewage even after the water dries out from the trap
• Mechanically cleanable trap up to the waste pipe
• Grid is included in packaging
• Self-adhesive tape for quality waterproofing
• Material: polypropylene filled with talc resistant to mechanical, chemical and thermal damage

SCOPE OF SUPPLY

• Linear shower drain
• Fixation set: screw Ø4.2×38 – 8 pcs, dowel Ø8 – 8 pcs
• Self-adhesive waterproofing tape
• Dismantling hook
• Stainless steel perforated grid Simple 8 in matt with a protective film
• Fixing hardware for anchoring the adjustable legs: screw 4.2×9.5 – 8 pcs
• Combined odour trap SMART
• Height adjustable feet 4 pcs

The post APZ18 SIMPLE appeared first on Selsela.

APPLICATION

• For indoor use
• For drainage of floor-level showers
• For installation into open spaces or near the wall of the shower area
• For full grids, grid FLOOR for embedding tiles and prismatic grid GAP
• For wheelchair access

SPECIFICATIONS

• Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
• For inserting full grids – stainless steel, tempered glass, synthetic stone, grid for embedding tiles and prismatic grid
• Installation height from 95 mm
• Adjustable height
• Trap firmly connected to the drain – 100% waterproofing
• Self-adhesive tape for quality waterproofing
• Mechanically cleanable trap up to the waste pipe
• The collar and trap are protected by foil, and the channel itself by a polystyrene insert
• The high flow rate is achieved due to the double compartment trap system
• Possibility to buy a combined odour trap
• 25 years guarantee
• Material of drainage channel: stainless steel AISI 304, DIN 1.4301
• Trap material: polypropylene

SCOPE OF SUPPLY

• The shower drain is assembled with the odour trap
• Anchoring set: screw Ø6×50 – 2 pcs, dowel Ø10 – 2 pcs, screw Ø4.2×38 – 3 pcs, dowel Ø8 – 3 pcs
• Self-adhesive waterproofing tape
• The collar and the odour trap inlet are covered by the protective foil
• Installation channel cover
• Fixing hardware for anchoring the adjustable legs: screw M6×12 – 2 pcs

The post APZ6 PROFESSIONAL appeared first on Selsela.

APPLICATION

• For indoor use
• For drainage of floor-level showers
• For installation into open spaces or near the wall of the shower area
• For use of various types of floor coverings
• For wheelchair access
• For sites with limited floor height

SPECIFICATIONS

• Elegant design thanks to the grid for embedding tiles without a stainless steel frame
• Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
• Installation height from 70 mm
• Adjustable height
• Trap firmly connected to the drain – 100% waterproofing
• Self-adhesive tape for quality waterproofing
• Mechanically cleanable trap up to the waste pipe
• The collar and trap are protected by foil, and the channel itself by a polystyrene insert
• The high flow rate is achieved due to the double compartment trap system
• Possibility to buy a combined odour trap
• 25 years guarantee
• Shower drain material: stainless steel 2 mm, AISI 304, DIN 1.4301
• Trap material: polypropylene

SCOPE OF SUPPLY

• The shower drain is assembled with the odour trap
• Grid for gluing various types of floor coverings
• Template for cutting tiles on the grid
• Fixation set: screws Ø6×50 – 2 pcs, dowels Ø10 – 2 pcs
• Self-adhesive waterproofing tape
• Protective foil covering for the drain edges and odour trap
• Protective film for trap inlet
• Installation trough cover – polystyrene
• Dismantling hook

The post APZ115 MARBLE LOW appeared first on Selsela.

APPLICATION

• For indoor use
• For drainage of floor-level showers
• For installation into open spaces or near the wall of the shower area
• For the perforated stainless steel grids, grid INSERT for embedding tiles, full grid SPACE and prismatic grid STREAM
• For traps APZ-S6, APZ-S9 and APZ-S12
• For wheelchair access

SPECIFICATIONS

• Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
• Gradient of inner part of the shower drain body
• Installation height from 54 mm
• Adjustable height
• Self-adhesive tape for quality waterproofing
• Shower drain made from one piece of stainless steel sheet
• The shower drain body is protected by the polystyrene insert
• 25 years guarantee
• Shower drain material: stainless steel 1.5 mm, AISI 304, DIN 1.4301

SCOPE OF SUPPLY

• Linear shower drain
• Self-adhesive waterproofing tape
• Protective foil covering for the drain edges and odour trap

The post APZ13 MODULAR appeared first on Selsela.

The post APZ23-DOUBLE9 FIT AND GO WALL appeared first on Selsela.

APPLICATION

• For indoor use
• For wooden and prefabricated buildings
• For drainage of floor-level showers
• For installation into open spaces or near the wall of the shower area
• For full grids, grid FLOOR for embedding tiles and prismatic grid GAP
• For wheelchair access

SPECIFICATIONS

• Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
• For inserting full grids – stainless steel, tempered glass, synthetic stone, grid for embedding tiles and prismatic grid
• Installation height from 95 mm
• Adjustable height
• Trap firmly connected to the drain – 100% waterproofing
• Self-adhesive tape for quality waterproofing
• Mechanically cleanable trap up to the waste pipe
• The collar and trap are protected by foil, and the channel itself by a polystyrene insert
• The high flow rate is achieved due to the double compartment trap system
• Possibility to buy a combined odour trap
• 25 years guarantee
• Shower drain material: stainless steel 2 mm, AISI 304, DIN 1.4301
• Trap material: polypropylene

SCOPE OF SUPPLY

• The shower drain is assembled with the odour trap
• Fixation set: screws Ø6×50 – 2 pcs, dowels Ø10 – 2 pcs
• Self-adhesive waterproofing tape
• Protective foil covering for the drain edges and odour trap

The post APZ1006 PROFESSIONAL appeared first on Selsela.

APPLICATION

• For indoor use
• For drainage of floor-level showers
• For installation into open spaces or near the wall of the shower area
• For wheelchair access

SPECIFICATIONS

• Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
• Gradient of inner part of the shower drain body
• Installation height from 81 mm
• Adjustable height
• Self-adhesive tape for quality waterproofing
• Shower drain made from one piece of stainless steel sheet
• The shower drain body is protected by the polystyrene insert
• Design is determined by double-sided grid DOUBLE – from one side it is a full grid made of stainless steel and the other side has an option for embedding tiles or waterproof wood to the thickness of 12 mm
• 25 years guarantee
• Shower drain material: stainless steel 1.5 mm, AISI 304, DIN 1.4301

SCOPE OF SUPPLY

• Linear shower drain
• Two-sided grid DOUBLE (full grid or grid for embedding tiles)
• Trap for shower drain APZ-S9
• Combined odour trap SMART
• Adjustable feet 4 pcs
• Self-adhesive waterproofing tape
• Protective foil covering for the drain edges and odour trap
• Protective film for trap inlet
• Installation trough cover – polystyrene
• Comb for applying glue into the grid frame
• Dismantling hook
• Fixation set for attaching adjustable legs: screw 4.2×38 – 4 pcs, anchor – 4 pcs

The post APZ13-DOUBLE9 appeared first on Selsela.

APPLICATION

• For indoor use
• For public areas
• For installation into open spaces or near the wall of the shower area
• For drainage of floor-level showers
• For wheelchair access

SPECIFICATIONS

• Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
• Grid BUBLE is attached to the drain body using screws so that it can not be removed without special tools
• Installation height from 85 mm
• Adjustable height
• Trap firmly connected to the drain – 100% waterproofing
• Self-adhesive tape for quality waterproofing
• Mechanically cleanable trap up to the waste pipe
• The collar and trap are protected by foil, and the channel itself by a polystyrene insert
• The high flow rate is achieved due to the double compartment trap system
• Possibility to buy a combined odour trap
• Grid is included in packaging
• 25 years guarantee
• Shower drain material: stainless steel 2 mm, AISI 304, DIN 1.4301
• Trap material: polypropylene

SCOPE OF SUPPLY

• The shower drain is assembled with the odour trap
• Fixation set: screws Ø6×50 – 2 pcs, dowels Ø10 – 2 pcs
• Self-adhesive waterproofing tape
• Protective foil covering for the drain edges and odour trap
• Perforated stainless steel grid BUBLE

The post APZ11 appeared first on Selsela.

APPLICATION

• For indoor use
• For wooden and prefabricated buildings
• For drainage of floor-level showers
• For installation directly to the wall
• For perforated stainless steel grids
• For wheelchair access

ADVANTAGES

• High flow rate (up to 68 l / min)
• 100% easy clean trap
• Low height installation
• Complete technical and design solutions
• Complete package including all accessories
• 25 year guarantee

SPECIFICATIONS

• Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
• Adjustable vertical insulating collar for tiles with a thickness of 6–12 mm
• Installation height from 85 mm
• Adjustable height
• Trap firmly connected to the drain – 100% waterproofing
• Self-adhesive tape for quality waterproofing
• Mechanically cleanable trap up to the waste pipe
• The collar and trap are protected by foil, and the channel itself by a polystyrene insert
• The high flow rate is achieved due to the double compartment trap system
• Facilitates the inclination of the floor
• Better and safer transition of the insulation from the floor to the wall
• Possibility to buy a combined odour trap
• 25 years guarantee
• Material of shower drain: stainless steel 2 mm, AISI 304, DIN 1.4301, EN1253-1
• Trap material: polypropylene

SCOPE OF SUPPLY

• The shower drain is assembled with the odour trap
• Anchoring set: screw Ø6×50 – 2 pcs, dowel Ø10 – 2 pcs, screw Ø4.2×38 – 3 pcs, dowel Ø8 – 3 pcs
• Self-adhesive waterproofing tape
• Protective foil covering for the drain edges and odour trap

The post APZ1004 FLEXIBLE appeared first on Selsela.

APPLICATION

• For indoor use
• For wooden and prefabricated buildings
• For drainage of floor-level showers
• For installation into open spaces or near the wall of the shower area
• For perforated stainless steel grids
• For wheelchair access
• For sites with limited floor height

ADVANTAGES

• High flow rate (up to 68 l / min)
• 100% easy clean trap
• Low height installation
• Complete technical and design solutions
• Complete package including all accessories
• 25 year guarantee

SPECIFICATIONS

• Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
• Installation height from 55 mm
• Adjustable height
• Trap firmly connected to the drain – 100% waterproofing
• Self-adhesive tape for quality waterproofing
• Mechanically cleanable trap up to the waste pipe
• The collar and trap are protected by foil, and the channel itself by a polystyrene insert
• The high flow rate is achieved due to the double compartment trap system
• Possibility to buy a combined odour trap
• 25 years guarantee
• Shower drain material: stainless steel 2 mm, AISI 304, DIN 1.4301
• Trap material: polypropylene

SCOPE OF SUPPLY

• The shower drain is assembled with the odour trap
• Fixation set: screws Ø6×50 – 2 pcs, dowels Ø10 – 2 pcs
• Self-adhesive waterproofing tape
• Protective foil covering for the drain edges and odour trap

The post APZ1101 LOW appeared first on Selsela.